Skip to main content

Specification Data Sheet

The Galvin CliniLever® Hospital Single Lever Shower Mixer is ideal for use in bathrooms and areas of high use. Our CliniLever® Hospital Single Lever Shower Mixer is supplied standard with a 119mm long lever handle finished in a bright chrome plate.

Features

  • 40mm cartridge assembly
  • Bright chrome plate finish

Technical Information

  • WaterMark: AS/NZS 3718 Lic. WM-022761
  • Inlet: 1/2" BSP - Female 
  • Headwork: Ceramic Cartridge 
  • Working Pressure Range (kPa): 150 Min - 500 Max
  • Working Temperature Range (°C): 10 Min - 80 Max
  • Finish: Chrome

Alternative Products Option

  • TM-SHWX CliniLever® Stainless Steel Lead Safe™ Shower or Bath Mixer

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.