Skip to main content

Specification Data Sheet

Our range of Vandal Resistant Tapware is manufactured to comply to all relevant standards. The range is designed primarily for use in busy public areas where a long lasting tap is essential. 

Features

  • Vandal resistant handle with locking ring to secure the handle to the spindle, which may only be removed using the key provided
  • High quality chrome finish for easy cleaning and maintain hygiene

Technical Information

  • WELS: 5 Star Rating (6L/min)
  • Nominal Flow Rate (LPM): 5.8
  • WaterMark: AS/NZS 3718 Lic. WMKA0034
  • Inlet: 1/2" CU / BSP
  • Outlet: Aerator
  • Headwork: Jumper Valve
  • Working Pressure Range (kPa): 100 Min - 500 Max
  • Working Temperature Range (°C): 5 Min - 80 Max
  • Finish: Chrome

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.