Skip to main content

Features

The AS/NZS 3718 WaterMark Approved CliniLever®  Shower Set, complies to AS6400-2005 WELS rated to 3 Star and is finished in a bright chrome plate.

  • Grade 304 stainless steel grab rail with satin finish
  • Hygienic health safe flange covers 
  • ABS side cradle fastened and tensioned to the grab rail for handset support and movement.
  • Strong and stylish ABS hand piece
  • PVC reinforced smooth and flexible spiral hose 
  • Chrome on brass wall outlet elbow which features
  • 9 L/min flow. Interchangable spigot and separate licensed dual check/non return valves to prevent back siphonage
  • 80mm CliniLever® contra rotating lever handles make showering easier for users with disabilities or limited hand mobility
  • Handles are finished in bright chrome plate finish for added durability and easy cleaning
  • Suitable for installation and will assist in compliance to AS1428.1 – Design for access and mobility-General requirements for access - New building work
  • AS 1428.1 accessible compliant
Downloads
Specification Data Sheet

CliniLever® Chrome Plated Brass Hospital Shower Set 80 C/D w/ Medi Hand Shower & 900 Stainless Steel Grab Rail

Product Code: TCS9C80C

The AS/NZS 3718 WaterMark Approved CliniLever®  Shower Set, complies to AS6400-2005 WELS rated to 3 Star and is finished in a bright chrome plate.

  • Grade 304 stainless steel grab rail with satin finish
  • Hygienic health safe flange covers 
  • ABS side cradle fastened and tensioned to the grab rail for handset support and movement.
  • Strong and stylish ABS hand piece
  • PVC reinforced smooth and flexible spiral hose 
  • Chrome on brass wall outlet elbow which features
  • 9 L/min flow. Interchangable spigot and separate licensed dual check/non return valves to prevent back siphonage
  • 80mm CliniLever® contra rotating lever handles make showering easier for users with disabilities or limited hand mobility
  • Handles are finished in bright chrome plate finish for added durability and easy cleaning
  • Suitable for installation and will assist in compliance to AS1428.1 – Design for access and mobility-General requirements for access - New building work
  • AS 1428.1 accessible compliant

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and reduce the use of non-recyclable or non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS3500 and the PCA, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product

Please visit www.galvinengineering.com.au to view the full warranty, our Maintenance & Cleaning information and any other additional information.

Whilst all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remains the property of Galvin Engineering Pty Ltd.