Skip to main content

Features

Our AS/NZS 3718 approved Galvin CliniLever® Hospital Single Lever Sink Mixer with 250mm reach is perfectly suited for use in hospitals, public disabled washrooms and areas of high use. It is supplied standard with a 165mm disabled lever and finished in a bright chrome plate.

Features

  • Extended 165mm lever for easy access
  • Commercial grade quality and fully backed by our industrial warranty
  • 40mm cartridge assembly
  • Complies with NSW Education EFSG Guidelines
  • Anti-scald adjustable stop ring
  • 250mm reach, solid cast brass swivel spout
  • AS 1428.1 accessible compliant
  • Stainless Steel Lead Safe™ option available TM-SNKXD

Technical Information

  • Inlet: 1/2" BSP - Female
  • Outlet: Laminar Flow Aerator  
  • Headwork: Ceramic Cartridge 
  • Working Pressure Range (kPa): 150 Min - 500 Max 
  • Working Temperature (°C): 10 Min - 80 Max
  • Nominal Flow Rate (LPM): 5.63
  • Finish: Chrome 

 

Specification Data Sheet

CliniLever® CP-BS Hospital Single Lever Sink Mixer 250 Reach w/ 165 Disabled Lever

Product Code: TM-SNKCPD

Our AS/NZS 3718 approved Galvin CliniLever® Hospital Single Lever Sink Mixer with 250mm reach is perfectly suited for use in hospitals, public disabled washrooms and areas of high use. It is supplied standard with a 165mm disabled lever and finished in a bright chrome plate.

Features

  • Extended 165mm lever for easy access
  • Commercial grade quality and fully backed by our industrial warranty
  • 40mm cartridge assembly
  • Complies with NSW Education EFSG Guidelines
  • Anti-scald adjustable stop ring
  • 250mm reach, solid cast brass swivel spout
  • AS 1428.1 accessible compliant
  • Stainless Steel Lead Safe™ option available TM-SNKXD

Technical Information

  • Inlet: 1/2" BSP - Female
  • Outlet: Laminar Flow Aerator  
  • Headwork: Ceramic Cartridge 
  • Working Pressure Range (kPa): 150 Min - 500 Max 
  • Working Temperature (°C): 10 Min - 80 Max
  • Nominal Flow Rate (LPM): 5.63
  • Finish: Chrome 

 

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and reduce the use of non-recyclable or non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS3500 and the PCA, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product

Please visit www.galvinengineering.com.au to view the full warranty, our Maintenance & Cleaning information and any other additional information.

Whilst all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remains the property of Galvin Engineering Pty Ltd.