Skip to main content

Specification Data Sheet

The Galvin CliniMix® Thermostatic Progressive Shower Mixer is purpose-built for mental health and healthcare facilities, offering a safe, reliabile, and user-friendly solution. It features an easy-to-operate temperature control with the option to set a thermostatically regulated temperature of 48°C, ensuring patient safety. The high-performance valve is designed for long-term reliability, water conservation, and cost-effectiveness. For added convenience, the mixer allows for the integration of an electronic piezo activation button, enabling the shower to resume flow and temperature settings from the previous use. Temperature adjustments can still be made manually via the ligature-resistant handle when needed.

Note: This product does not include the activation button or electronic system required to operate shower. Please contact our specialist sales team for activation, electronic controller and valve options suitable for your environment. 

Features

  • Ligature resistant design
  • Vandal resistant design 
  • Reduces risk of Legionella growth by mixing water close to point of discharge and minimising stagnant warm water
  • Resumes flow and temperature settings from previous use (temperature adjustments can be made manually via handle when needed)
  • Minimises dirt build up and is fast and easy to clean due to its smooth internal and external design
  • Hygenic laminar flow outlet
  • Maximum temperature limiter fitted for protection from accidental scalding
  • All servicing and commissioning can be done without removing the device
  • Suitable for high and low pressure systems
  • Designed to provide stable mixed temperature with rapid shut down in the event of cold or hot water supply failure
  • Approved to: TMV3, Department of Health performance specification D08

Technical Information

  • Inlet: 1/2" BSP - Female
  • Outlet: 1/2" BSP - Female
  • Headwork: Thermostatic Mixing Valve (TMV)
  • Working Pressure Range (bar): 0.5 Min to 5.0 Max
  • Hot Temperature Supply Range (°C): 55 Min - 65 Max
  • Cold Temperature Supply Range (°C): 5 Min - 20 Max
  • Operating Working Pressure (bar): 0.5 - 5.0
  • Maximium Outlet Pressure (bar): 5.0
  • Permitted Supply Pressure Variation: 10:1
  • Minimum Temperature Differential (between supply and the outlet temperature) (°C): 10°C
  • MIxed Water Temperature (°C): 41°C
  • Minimum Flow Rate for Stable Outlet Temperature: 6 LPM
  • Maximum Thermostatic Temperature (°C): 43°C
  • Finish: Chrome

Optional Extras

  • WM-PMSKIT CliniMix® Inwall Shower Disinfection Plug Kit

Alternative Product Options

  • WM-TMVPMSCS CliniMix® CP-BS Ligature Resistant Thermostatic Progressive Shower Mixer with GalvinCare® Handle W&C
  • WM-TMVPMSCSE CliniMix® CP-BS Ligature Resistant Electronic Thermostatic Progressive Shower Mixer with GalvinCare® Handle H&C
  • WM-TMVPMSCSID CliniMix® CP-BS Ligature Resistant Ducted Thermostatic Progressive Shower Mixer H&C

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.

Galvin Engineering offers a range of ligature resistant, anti-ligature, vandal resistant, and anti-vandal products designed to reduce the risk of self-harm, suicide, or vandalism, but we cannot offer any guarantee that these events will not take place. Therefore, it is important to understand that installation of these products will not eliminate all risks.

When we use the terms ligature resistant and/or anti-ligature about our products, it means that we have designed and tested these products to reduce the risk of that product being used as a ligature attachment point. They will not protect or prevent injury when the risks were unknown to us at the time of the design of the products. They are not a replacement for professionals who are trained in the proper evaluation, management, and supervision of persons at risk of self-harm or suicide.

When we use the terms vandal resistant and/or anti-vandal about our products, it means that we have designed and tested these products to reduce the risk of that product being vandalised. They will not protect or prevent damage when the risks were unknown to us at the time of the design of the products.

Galvin Engineering recommends that designers, installers, facility managers, and anyone intending to rely on or use any products displayed in our literature or on our website, satisfy themselves about the suitability of the products for their intended use in the building design, and ensure they are being installed, used, and maintained in accordance with our instructions. Facility managers, clinicians, and carers need to ensure that reasonable steps are taken to reduce the accessibility of unnecessary ligatures to at-risk patients, confirm that adequate risk mitigation controls are in place, and make sure that applicable health, safety and patient care standards are being met.

Galvin Engineering makes no express or implied warranties regarding the ability of the product to prevent death or injury, to resist all ligature attachment, or to prevent vandalism. No responsibility is assumed by Galvin Engineering for any incidental or consequential damages resulting from the use of any products sold by Galvin Engineering. To the fullest extent permitted by law, Galvin Engineering excludes all liability for damage or injury to any person, damage to any property, and any indirect consequential claims, loss or damage.