Skip to main content

Features

Our CliniMix® Wall Mounted Progressive Lever Basin Thermostatic Mixer. This new design for use in medical or nursing procedures provides state of the art features to comply with the latest healthcare requirements. The single lever operates on/off temperature controls for straightforward operation, simplifying hand wash procedures and the long arm is operated with elbows to avoid hand contact. Suitable for high and low-pressure systems it can set to deliver a thermostatically controlled water temperature of 48ºC maximum.

Features

  • The first Australian approved progressive mixer with an inbuilt thermal disinfection capability to minimise bacteria build-up.
  • Has a unique thermal disinfection bypass feature.
  • Enables water to be mixed closer to the point of discharge reducing legionella risk by minimising warm water stagnation.
  • Smooth internal and external components to decrease harbouring of bacteria.
  • Features a hygienic laminar flow outlet.
  • NSW Health approved.
  • All servicing and commissioning can be done without penetrating the wall cavity or removing the device. Easy to access isolators helps to minimise the time of
    commissioning and maintenance.

Technical Information

  • Inlet: 1/2" BSP - Female
  • Outlet: Flow Straightener
  • Headwork: Thermostatic Mixing Valve (TMV)
  • Working Pressure Range (kPa): 20 Min - 500 Max
  • Working Temperature Range (°C): 5 Min - 85 Max
  • Adjustable Temperature (°C): 35 - 45
  • Maximum Outlet Pressure (kPa): 500
  • Permitted Supply Pressure Variation: 10:1
  • Operating Thermostatic Temp. Range* (°C): Full cold - 45
  • Factory Set Thermostatic Temp. Range (°C): 39 - 41
  • Maximum Thermostatic Temperature: (°C): 48
  • Nominal Flow Rate (LPM): 8
  • Construction: Brass
  • Finish: Chrome

Video

Specification Data Sheet

CliniMix® CP-BS Wall Mounted Thermostatic Progressive Basin Mixer - Lever 110-140

Product Code: WM-TMVPMW-125

Our CliniMix® Wall Mounted Progressive Lever Basin Thermostatic Mixer. This new design for use in medical or nursing procedures provides state of the art features to comply with the latest healthcare requirements. The single lever operates on/off temperature controls for straightforward operation, simplifying hand wash procedures and the long arm is operated with elbows to avoid hand contact. Suitable for high and low-pressure systems it can set to deliver a thermostatically controlled water temperature of 48ºC maximum.

Features

  • The first Australian approved progressive mixer with an inbuilt thermal disinfection capability to minimise bacteria build-up.
  • Has a unique thermal disinfection bypass feature.
  • Enables water to be mixed closer to the point of discharge reducing legionella risk by minimising warm water stagnation.
  • Smooth internal and external components to decrease harbouring of bacteria.
  • Features a hygienic laminar flow outlet.
  • NSW Health approved.
  • All servicing and commissioning can be done without penetrating the wall cavity or removing the device. Easy to access isolators helps to minimise the time of
    commissioning and maintenance.

Technical Information

  • Inlet: 1/2" BSP - Female
  • Outlet: Flow Straightener
  • Headwork: Thermostatic Mixing Valve (TMV)
  • Working Pressure Range (kPa): 20 Min - 500 Max
  • Working Temperature Range (°C): 5 Min - 85 Max
  • Adjustable Temperature (°C): 35 - 45
  • Maximum Outlet Pressure (kPa): 500
  • Permitted Supply Pressure Variation: 10:1
  • Operating Thermostatic Temp. Range* (°C): Full cold - 45
  • Factory Set Thermostatic Temp. Range (°C): 39 - 41
  • Maximum Thermostatic Temperature: (°C): 48
  • Nominal Flow Rate (LPM): 8
  • Construction: Brass
  • Finish: Chrome

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and reduce the use of non-recyclable or non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS3500 and the PCA, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product

Please visit www.galvinengineering.com.au to view the full warranty, our Maintenance & Cleaning information and any other additional information.

Whilst all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remains the property of Galvin Engineering Pty Ltd.