Skip to main content

Features

Galvin CliniMix® Lead Safe™ CMV2 Wall Mounted Handsfree POU, Proximity Sensor, Mains, Chrome Face Plate with Temperature Monitoring is suitable for medical or nursing procedures, providing state-of-the-art features to comply with the latest healthcare requirements. Suitable for high and low pressure systems. The proximity sensor will activate when a users hands are in the set detection area.

Features

  • Front access for commissioning, servicing and disinfection
  • Easy front of wall thermal disinfection with minimal patient interruptions thanks to:
    o no adjustment or resetting of valve required
    o inbuilt thermal disinfection facility for manual flush
    o access via key control port on faceplate
  • AS/NZS 4032.4 and NCC 2022 Vol 3, Clause A5G4(2) ‘lead free requirements’ compliant
  • Modern high end chrome plated finish. Also available in coloured glass finish (100.41.21.20, 500 order minimum)
  • Incorporates Galvin Engineering Smart TMV Monitoring and Dead Leg Detection System
  • Hygienic self draining smooth bore outlet to suit Type A and B basin complying with AusHFG Guidelines
  • Consists of inwall box and front of wall finishing kit
  • Adjustable handsfree proximity sensor technology minimising the spread of infection. Also available with wave on/off sensor (100.41.11.20)
  • Enables water to be mixed closer to the point of discharge, reducing risk of Legionella
  • Provides stable mixed temperature and rapid shut down in the event of cold/hot water supply failure keeping patients safe

Technical Information

  • Inlet: 3/4" CU Tube
  • Outlet: Flow Straightener
  • Headwork: Thermostatic Mixing Valve (TMV)
  • Working Pressure Range (kPa): 50 Min - 500 Max
  • Permitted Supply Pressure Variation: 10:1
  • Mixed Temperature Range (°C): 35 Min - 45 Max
  • Factory Set Thermostatic Temperature (°C): 41
  • Nominal Flow Rate (LPM): 8
  • Construction: Lead Safe™ DZR Brass
  • Finish: Chrome
Specification Data Sheet

CliniMix® Lead Safe™ CMV2 Wall Mounted Handsfree POU, Proximity Sensor, Mains, Chrome Face Plate with Temperature Monitoring

Product Code: 100.41.21.20

Galvin CliniMix® Lead Safe™ CMV2 Wall Mounted Handsfree POU, Proximity Sensor, Mains, Chrome Face Plate with Temperature Monitoring is suitable for medical or nursing procedures, providing state-of-the-art features to comply with the latest healthcare requirements. Suitable for high and low pressure systems. The proximity sensor will activate when a users hands are in the set detection area.

Features

  • Front access for commissioning, servicing and disinfection
  • Easy front of wall thermal disinfection with minimal patient interruptions thanks to:
    o no adjustment or resetting of valve required
    o inbuilt thermal disinfection facility for manual flush
    o access via key control port on faceplate
  • AS/NZS 4032.4 and NCC 2022 Vol 3, Clause A5G4(2) ‘lead free requirements’ compliant
  • Modern high end chrome plated finish. Also available in coloured glass finish (100.41.21.20, 500 order minimum)
  • Incorporates Galvin Engineering Smart TMV Monitoring and Dead Leg Detection System
  • Hygienic self draining smooth bore outlet to suit Type A and B basin complying with AusHFG Guidelines
  • Consists of inwall box and front of wall finishing kit
  • Adjustable handsfree proximity sensor technology minimising the spread of infection. Also available with wave on/off sensor (100.41.11.20)
  • Enables water to be mixed closer to the point of discharge, reducing risk of Legionella
  • Provides stable mixed temperature and rapid shut down in the event of cold/hot water supply failure keeping patients safe

Technical Information

  • Inlet: 3/4" CU Tube
  • Outlet: Flow Straightener
  • Headwork: Thermostatic Mixing Valve (TMV)
  • Working Pressure Range (kPa): 50 Min - 500 Max
  • Permitted Supply Pressure Variation: 10:1
  • Mixed Temperature Range (°C): 35 Min - 45 Max
  • Factory Set Thermostatic Temperature (°C): 41
  • Nominal Flow Rate (LPM): 8
  • Construction: Lead Safe™ DZR Brass
  • Finish: Chrome

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and reduce the use of non-recyclable or non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS3500 and the PCA, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product

Please visit www.galvinengineering.com.au to view the full warranty, our Maintenance & Cleaning information and any other additional information.

Whilst all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remains the property of Galvin Engineering Pty Ltd.