Skip to main content

Features

AS/NZS 3718 approved, Galvin Ezy-Push® Lead Safe™ timeflow push button pillar tapware is ideal for use in schools, end of trip facilities, washrooms and areas of high use. Our Ezy-Push®  range is water-conserving and cost-effective.

Features

  • NSF/ANSI 372 certified – manufactured using high quality DZR solid brass with less than 0.25% lead content*
  • Complies with NSW Education EFSG Guidelines
  • Clean hygienic design
  • Handsfree self-closing operation
  • Time flow taps are designed to operate at full mains pressure
  • Low maintenance and easy to operate
  • Smooth round designs to facilitate easy clean and help reduce dirt and bacteria growth

Technical Information

  • Inlet: 1/2" BSP - Male
  • Outlet: Flow Straightener
  • Headwork: Time Flow Cartridge
  • Working Temperature Range (°C): 5 Min - 65 Max
  • Working Pressure Range (kPa): 100 Min - 500 Max
  • Nominal Flow Rate (LPM): 4.87
  • Construction: Lead Safe™ DZR Brass*
  • Finish: Chrome

Click here for more details about Lead Safe™ >

Specification Data Sheet

Ezy-Push® CP-BS Lead Safe™ Timeflow Push Button Pillar Tap - 6 Sec

Product Code: 173.15.21.00

AS/NZS 3718 approved, Galvin Ezy-Push® Lead Safe™ timeflow push button pillar tapware is ideal for use in schools, end of trip facilities, washrooms and areas of high use. Our Ezy-Push®  range is water-conserving and cost-effective.

Features

  • NSF/ANSI 372 certified – manufactured using high quality DZR solid brass with less than 0.25% lead content*
  • Complies with NSW Education EFSG Guidelines
  • Clean hygienic design
  • Handsfree self-closing operation
  • Time flow taps are designed to operate at full mains pressure
  • Low maintenance and easy to operate
  • Smooth round designs to facilitate easy clean and help reduce dirt and bacteria growth

Technical Information

  • Inlet: 1/2" BSP - Male
  • Outlet: Flow Straightener
  • Headwork: Time Flow Cartridge
  • Working Temperature Range (°C): 5 Min - 65 Max
  • Working Pressure Range (kPa): 100 Min - 500 Max
  • Nominal Flow Rate (LPM): 4.87
  • Construction: Lead Safe™ DZR Brass*
  • Finish: Chrome

Click here for more details about Lead Safe™ >

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and reduce the use of non-recyclable or non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS3500 and the PCA, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product

Please visit www.galvinengineering.com.au to view the full warranty, our Maintenance & Cleaning information and any other additional information.

Whilst all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remains the property of Galvin Engineering Pty Ltd.