Skip to main content

Specification Data Sheet

This hidden in-wall cistern is part of the premium in-wall toilet system and is activated via pneumatic flush buttons.

Features

  • Suits floor mounted toilet pans
  • Slim 80mm design for in-wall installation
  • Front access through the flush plate for easy installation and servicing
  • Fully insulated with anti-condensation foam to help prevent moisture build-up
  • Pneumatic flush system connects to flush plate buttons (sold separately)

Technical Information

  • WELS: 4 Star Rating (3.2L/min)
  • Nominal Flow Rate (LPM): 3.2
  • WaterMark: AS 1172.2 Lic. 023345

    Specify with Earlymark logo

This product is compatible with

  • 656512 SS Vandal Resistant Dual Flush Plate Assembly for Pneumatic Inwall Cistern with CP-BS Raised Buttons
  • 105.11.20.04 GalvinAssist® Clean Flush Ambulant Toilet Pan with Double Flap Soft Close Grey Seat
  • 105.11.20.00 GalvinAssist® Clean Flush Ambulant Toilet Pan with Double Flap Soft Close White Seat
  • 105.11.10.01 GalvinAssist® Rimless Accessible Toilet Pan with Single Flap Blue Seat
  • 105.11.10.04 GalvinAssist® Rimless Accessible Toilet Pan with Single Flap Grey Seat
  • 105.96.00.00 GalvinAssist® Chrome, Accessible Dual Flush Plate, Pneumatic Push to Suit Inwall Cistern
  • 105.95.00.00 GalvinAssist® Chrome, Dual Flush Plate, Pneumatic Push to Suit Inwall Cistern
  • 656510 SS Vandal Resistant Dual Flush Plate Assembly for Pneumatic Inwall Cisterns

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin products are covered under our Manufacturer's Warranty. Galvin products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance, and General Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.