Dementia‑friendly fixtures reduce confusion and scald risk, improve independence, and support carers. Features include clear hot/cold markings, lever handles with easy grip, simple, intuitive controls, contrasting colours for visibility, and thermostatic protection at outlets. These choices create safer, more familiar bathrooms for older adults in facilities and private homes.

Managing Legionella is critical for resident safety. A robust programme should include:

• Risk assessment of all water systems (hot, cold, showers, taps).
• A Water Management Plan (temperature, disinfection, monitoring).
• Temperature control outside Legionella growth range; pair hot water storage/distribution with TMVs at outlets to keep user temperatures safe.
• Water treatment and verified disinfectant levels.
• Cleaning & maintenance to remove sediment/biofilm and avoid stagnation.
• Regular monitoring & testing to validate controls and detect issues early.
• Staff training on prevention and response.
• Documentation & review to keep the plan current.

Galvin supports this with auto‑flush modes, in‑situ thermal disinfection cycles (where specified), self‑draining spouts, and lead‑free, easy‑clean designs that help reduce biofilm and support infection control programmes.

Key references for aged care and home bathrooms include:

• AS/NZS 3500 – Plumbing and drainage.
• AS 4032 (incl. 4032.3 for in‑service testing) – Thermostatic Mixing Valves (TMVs).
• AS/NZS 6400 – Water Efficiency Labelling (WELS).
• AS 1428.1 & AS 1428.2 – Accessibility requirements for design and installation.
• AusHFG (Australian Health Facility Guidelines) – Hygiene, clinical safety and operational guidance.

Galvin products are designed to support compliance while delivering dementia‑friendly, accessible operation.

Monitoring brings measurable value:

• Early detection of temperature or quality deviations (e.g., potential Legionella conditions).
• Preventive maintenance by flagging performance issues before failure.
• Regulatory compliance evidence for audits.
• Enhanced resident safety through controlled temperatures and timely alerts.
• Data‑driven decisions on usage, flushing, and energy optimisation.
• Cost savings by preventing incidents, reducing waste, and extending asset life.

Pairing monitoring with timed‑flow or sensor tapware further reduces misuse and flooding risk.

TMVs blend hot and cold water to keep outlet temperatures typically between 38°C and 45°C, protecting vulnerable users from scalding. Best practice includes:

• Qualified installation and commissioning by licensed plumbers.
• Periodic in‑service testing/maintenance to AS 4032.3, with calibrated equipment.
• Record‑keeping (asset register, test results, corrective actions).
• Staff awareness of temperature safety and incident procedures.

Galvin’s TMV, TMV‑compatible tapware and thermostatic systems simplify compliance and routine checks.

Prioritise simplicity, visibility and safety:

• High‑contrast handles/indicators and tactile markings.
• Lever or single‑handle operation with smooth, predictable control.
• Thermostatic protection at outlets to prevent burns.
• Accessibility features (grab rails, shower seats, handheld showerheads).
• Hygienic, easy‑clean surfaces to reduce contamination.
• Ligature‑resistant forms (where risk profiles warrant) to minimise attachment points.

The GalvinAssist^® range is crafted for assisted care across aged care and dementia contexts.

Common items include grab rails, raised toilet seats, fold‑down shower seats, walk‑in/roll‑in showers, handheld adjustable showerheads, motion‑activated lighting, accessible basins with rounded edges, lever or sensor tapware, and TMV‑protected outlets. These combine safety, accessibility and comfort for residents.

Design choices matter: smooth, low‑joint surfaces, easy‑clean materials, lead‑free pathways, auto‑flush modes, in‑situ thermal disinfection (where specified), and self‑draining spouts help lower contamination risks. Pair with good cleaning protocols, ventilation, and routine inspections to maintain a hygienic environment.

Yes. Galvin solutions meet/surpass WELS requirements and offer timed‑flow, push‑button or sensor operation to avoid excessive run‑time and deliberate flooding. These features support sustainability goals and reduce operating costs in care settings and private homes.

• Stainless steel for strength, corrosion resistance and cleanability.
• Reinforced composite polymers for smooth, robust finishes.
• Heavy‑duty brass/chrome‑plated components where internal durability is needed.

These materials deliver long service life and simpler maintenance.

External access allows quick isolation during flooding/misuse, supports routine maintenance without entering resident spaces, and reduces risk for staff and homeowners. It also minimises disruption to residents while keeping systems safely under control.