.jpg)
To help ensure there are enough plumbing products for housing, the Australian Building Codes Board (ABCB) has extended the period for installing existing WaterMark certified products.
What’s changing and when?
The National Construction Code (NCC) has introduced a new limit for the allowable level of lead in plumbing products used for drinking water. Copper alloy plumbing products containing more than 0.25% lead will no longer be authorised for installation in a plumbing system used to convey drinking water.
This is covered in Clause A5G4 in NCC Volume Three (the Plumbing Code of Australia).
In December 2025, the ABCB agreed to extend the transition period for the installation of lead free plumbing products until 30 April 2028. The transition allows industry to make the necessary changes to provide lead free products to the market and to sell down existing stock. This means plumbing practitioners may continue to install existing WaterMark products until 30 April 2028*.
From 1 May 2028*, plumbing practitioners will need to look for the Lead Free WaterMark trademark on a copper alloy plumbing product. This ensures the product is authorised for use in contact with drinking water.
*Note: State and territory legislation governs the application and enforcement of the NCC for the installation of plumbing products in Australia. As such, states and territories may vary transition arrangements, including transition dates. Please refer to your jurisdiction for details on transition arrangements that may apply to you, a list can be found on the ABCB website.
How will lead free plumbing products be identified?
Lead free products will be:
-
WaterMark certified as a lead free product
-
marked with the Lead Free WaterMark
-
listed on the WaterMark Product Database.
The Lead Free WaterMark will be applied in one of the following formats, depending on the material, size and shape of the product.

Which plumbing products will require the Lead Free WaterMark?
The WaterMark Schedule of Products outlines all plumbing product types which require WaterMark certification. The schedule also identifies which product types must comply with the lead free requirements.
What does this mean for manufacturers and suppliers?
Manufacturers and suppliers of impacted products should contact their WaterMark Conformity Assessment Body regarding compliance with the lead free requirements. From 1 May 2026, manufacturers will only be allowed to produce Lead Free WaterMark certified plumbing products. Suppliers can continue to sell down the remaining stock of existing products for installation by 30 April 2028.
What does this mean for plumbing practitioners?
All practitioners should familiarise themselves with the new regulatory requirements, especially those who are specifying, procuring and installing plumbing products.
Plumbing practitioners may continue to install existing products until 30 April 2028* providing the products have a current WaterMark licence. From 1 May 2028*, only products marked with the Lead Free WaterMark will be authorised for use in plumbing installations used to convey drinking water.
From 1 May 2028*, look for the Lead Free WaterMark on copper alloy products to ensure they can be installed in Australia, regardless of any international markings and other claims on products and packaging. Remember to check the WaterMark Product Database to make sure the WaterMark licence number is valid.
What about spare parts?
The NCC lead free requirements are not retrospective, so existing spare parts remain suitable for use in existing products. Likewise, spare parts used in the maintenance of Lead Free WaterMark certified products must also be suitable for use without compromising the lead free status of these products.
Manufacturers of Lead Free WaterMark certified plumbing products should provide instructions for the selection of suitable spare parts and make these parts available through their suppliers.
Those installing spare parts and undertaking replacement work for existing products can continue to use existing spare parts in accordance with manufacturer's instructions. Where maintenance is being undertaken on Lead Free WaterMark certified plumbing products, practitioners must use appropriate spare parts as per manufacturer's instructions.
All products listed on the WaterMark Schedule of Products as requiring lead free certification must comply with the lead free requirements by 1 May 2028. If products don’t comply, they will not be authorised for use, even if they are commonly supplied as ‘spare’ or replacement parts for the maintenance of other plumbing products.
Where can I find more information?
The ABCB has a range of resources to support industry through the transition:
-
WaterMark Notice of Direction 2022/2 Marking requirements for lead free plumbing products
-
Lead free plumbing products frequently asked questions (FAQs)
Manufacturers and suppliers can find further information at Lead free plumbing product certification. Practitioners can read more at Lead free plumbing products.
If you have questions relating to the implementation and enforcement of the NCC lead free requirements contact the plumbing administration in your jurisdiction.
Want to hear more? Sign up to ABCB newsletters for all the latest updates and insights on everything ABCB, NCC and WaterMark. Subscribe today by visiting https://www.abcb.gov.au/register
Key messages
-
Check the WaterMark Schedule of Products to identify which plumbing products require WaterMark certification and which products must meet lead free requirements
-
Lead free transition began on 1 May 2023, allowing manufacturers to start supplying products carrying the Lead Free WaterMark trademark.
-
Since 1 May 2026, manufacturers have only been permitted to produce Lead Free WaterMark Certified products for identified product categories.
-
Installation deadline extended to 1 May 2028. The Australian Building Codes Board (ABCB) agreed to extend the transition period, giving plumbers additional time to use existing stock.
-
Until 1 May 2028*, plumbers can continue to install products manufactured before the transition, provided they hold current WaterMark certification.
-
From 1 May 2028*, products that come into contact with drinking water will need to display the Lead Free WaterMark trademark to be authorised for installation.
-
Look for the Lead Free WaterMark trademark when purchasing or installing plumbing products intended for drinking water applications.
-
Be aware of jurisdictional differences*. States and territories may have different transition arrangements or implementation dates, so plumbers should check local regulatory requirements. State and territory lead free transition information can be found at: Lead free plumbing products | WaterMark
- If you have questions about implementation and enforcement of the NCC lead free requirements contact the plumbing administration in your jurisdiction.