Skip to main content

Features

Our Slip-Safe® range of floor drains range has been designed to address concerns about possible accidental injury to pedestrians, caused by high heels shoes penetrating grates. The design of the grates also minimises potential problems where tips of crutches, wheelchair wheels or small children’s toes could become lodged in the grates. Cast stainless steel square floor cleanout slip-in with stainless steel lock down Allen key screws, machined/finished surface, load rated to Class B for 150mm opening.

Features

  • Investment Cast Stainless Steel.
  • Spigot fits inside PVC pipe for fast and trouble free installation.
  • Suitable for concourse paving and tiled applications.
  • Load tested to Class B of AS 3996:2006.
Specification Data Sheet

Slip-Safe® SS316 Bolted Cleanout Round 150x100 PVC/HDPE/CU Slip-In

Product Code: 67790X

Our Slip-Safe® range of floor drains range has been designed to address concerns about possible accidental injury to pedestrians, caused by high heels shoes penetrating grates. The design of the grates also minimises potential problems where tips of crutches, wheelchair wheels or small children’s toes could become lodged in the grates. Cast stainless steel square floor cleanout slip-in with stainless steel lock down Allen key screws, machined/finished surface, load rated to Class B for 150mm opening.

Features

  • Investment Cast Stainless Steel.
  • Spigot fits inside PVC pipe for fast and trouble free installation.
  • Suitable for concourse paving and tiled applications.
  • Load tested to Class B of AS 3996:2006.

Typical Installation

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and reduce the use of non-recyclable or non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS3500 and the PCA, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product

Please visit www.galvinengineering.com.au to view the full warranty, our Maintenance & Cleaning information and any other additional information.

Whilst all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remains the property of Galvin Engineering Pty Ltd.