The Slip-Safe® 69468X is a slip-resistant floor cleanout in a 150mm format, with an integrated vinyl flange and a slip-in connection compatible with PVC, HDPE, or copper risers. Designed for commercial environments including car parks, shopping centres, concourse areas, and decks.
As a cleanout, the 69468X provides access to the drainage pipe beneath for maintenance and inspection while presenting a slip-resistant walking surface at floor level. The textured grate surface reduces the risk of pedestrian slips and falls, while the vinyl flange creates a watertight seal at the sheet vinyl flooring interface. Stainless steel lock-down Allen key screws secure the grate, and the spigot fits directly inside PVC, HDPE, or copper risers for fast and straightforward installation.
Constructed from investment cast grade 316 stainless steel with a machined/linished surface. Complies with AS 3996 Class B and EN 1253 Class R50. WaterMark certified to WMTS 040 (Lic. WMK02448).
Trusted in commercial construction across Australia since 1995, with installations in landmark projects including Fiona Stanley Hospital and Optus Stadium in Perth, WA.
Features
Technical Information
We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.
Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.
Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.
While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.
Click the buttons below to read Galvin Engineering's Terms and Conditions.
 |
 |
 |
