The HeelGrate® SS316 Floor Drain Grate Round 300x150mm BSP is a stainless steel 316 commercial floor drain designed for pedestrian-safe installations where a BSP threaded connection to the waste pipework is required.
The grate’s 5mm bar gap geometry prevents high-heel penetration and minimises the risk of items such as crutch tips and wheelchair wheels becoming lodged, meeting the pedestrian safety intent of AS 3996 Class B. The precision-machined grate surface ensures a flush, accurate fit, and lockdown Allen key screws prevent unauthorised removal. WaterMark certified to WMTS 040 (Lic. WMK02448).
Features
Flow Rate Guide - Litres per Minute at Varying Pressure Head (mm of Water)
| Pressure Head mm of Water | ||||
| 10mm | 20mm | 30mm | 40mm | 50mm |
| 164.5 | 255.8 | >313 | - | - |
Technical Information
We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.
Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.
Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.
While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.
Click the buttons below to read Galvin Engineering's Terms and Conditions.
 |
 |
 |
