CliniMix® Lead Safe™ Thermostatic Mixing Valve W/- 15 Inlet & 15/20 Outlet

Product Code: 101.70.00.00


$448 incl GST

Our CliniMix® range of thermostatic mixing valves are designed to protect the most vulnerable from scalding or cold water shock by providing tempered water to the desired outlets that comply with the relevant Australian Standards. 

Features
  • Manufactured using Lead Safe™ DZR Brass with less than 0.25% lead content*
  • Safe, simple and easy to maintain.
  • Flat-faced connections allow removal of the valve without disturbing the pipework.
  • In the event of either hot or cold water supply failure the valve will shut down, quickly restoring flow when normal conditions resume.
  • Suitable for installation in low-pressure systems and will operate with working pressure as low as 20kPA.
  • Water temperature is established at plus or minus 2 degrees even during water pressure or temperature fluctuations. 
  • Units come complete with right angles isolating ball valve, non-return valve and strainer assemblies. 
  • Can be installed in any configuration with the water outlet in the horizontal or vertical position, and inlet connections can be rotated to suit inlet pipework.
 
Technical Information
  • Inlet: 1/2" BSP - Male
  • Outlet: 1/2" or 3/4 BSP
  • Headwork: Thermostatic Mixing Valve 
  • Working Pressure Range (kPa): 20 Min - 500 Max 
  • Hot Supply Temperature Range (°C): 60 Min - 90 Max                                                                                                                                                                                  Cold Supply Temperature Range (°C): 5 Min - 25 Max
  • Adjustable Temperature Range (°C): 35 Min - 48 Max 
  • Maximum Inlet pressure Ratio: 6:1 
  • Factory Set Thermostatic Temperature (°C): 43.5 
  • Minimum Flow Rate for stable outlet temperature (LPM): 6 
  • Maximum Flow Rate (LPM): 25 lpm @100kPa
  • Construction: Lead Safe™ DRZ Brass*
  • Finish:  Chrome

*As ‘lead free’ is not currently defined by law in Australia and New Zealand, our definition of Lead Safe™ is based on the requirement of s1417 of the USA’s Safe Drinking Water Act (SDWA) and the relevant US standards NSF61 / NSF372.  The SDWA defines ‘lead free’ as “not more than a weighted average of 0.25% lead when used with respect to the wetted surface of pipes, pipe fittings, plumbing fittings and fixtures”.


Downloads

  • The prices on this website are indicative only, and are the Recommended Retail Price for stores and online sites selling Galvin Engineering products.
  • The actual pricing charged will ultimately be decided by those stores and online sites selling Galvin Engineering products. Stores selling Galvin Engineering products are listed on our website here.
  • The prices are in AUD, are inclusive of GST, are exclusive of freight, and are subject to change without notice.


Others Also Viewed



More From This Category


Anti-Tamper Cap for CliniMix WM-TMV1 (Yellow)

Anti-Tamper Cap for CliniMix WM-TMV1 (Yellow)

Product Code : WM-ATC-1

$26 incl GST
CliniMix Stainless Steel Cabinet Only w/ Universal Door 3 Holes Top & Bottom
$560 incl GST
CliniMix Stainless Steel Cabinet Only w/ Universal Door 4 Holes Top & Bottom
$822 incl GST
CliniMix TMV Stainless Steel Cabinet Ass with Universal Door 20 Bottom In & Out
$1,194 incl GST
CliniMix TMV Stainless Steel Cabinet Ass w/ Universal Door 20 H&C Bypasses, Bottom In & Out
$1,728 incl GST