This innovative lead free Galvin CliniMix® point of use thermostatic progressive mixer provides state-of-the-art safety features to comply with the latest healthcare requirements. The single lever operates on/off temperature control for straight forward operation simplifying hand wash procedures and the long arm is operated handsfree with elbows to avoid hand contact or cross-contamination. Suitable for high and low pressure systems it can be set to deliver a thermostatically controlled water temperature up to 48ºC maximum.
Features
Technical Information
We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.
Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.
Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.
While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.
Our Lead Safe™ product range is compliant with the Lead Free Requirements of the NCC 2022 Vol. Three, Clause A5G4(2) and NSF/ANSI 372.
Can be installed to comply to AS 1428.1 Design for Access and Mobility requirements. Important: strict adherence to AS 1428.1 installation guidelines is required to meet compliance standards.
Click the buttons below to read Galvin Engineering's Terms and Conditions.
 |
 |
 |
