Skip to main content

Specification Data Sheet

Features

  • Stylish minimalist design, sits flat against wall
  • Clean Flush rimless pan design for an efficient, powerful flush
  • Easy care height, pan height 440 mm
  • White vitreous china
  • Care toilet seat, soft closing, quick-release for easy removal and cleaning
  • S or P trap, back entry or bottom entry plumbing
  • AS 1428.1 accessible compliant when installed following AS 1428.1 guidelines
  • Front fixed installation

Technical Information 

  • WELS: 4 Star Rating (3.1L/min)
  • Nominal Average Flush (LPM): 3.1
  • Full Flush (LPM): 4.2
  • Half Flush (LPM): 2.8
  • WaterMark: AS 1172.1 & AS 1172.2 Lic. 023345
  • Cistern: Suits back entry inlet or bottom entry plumbing. Left and right bottom entry inlet points
  • Pan: Wall faced close coupled with rimless pan design
  • Material: White vitreous china
  • Buttons: Raised flush buttons, full flush and half flush
  • Traps: Universal trap, suitable for S or P trap installations

                      S-trap: 75-250 mm (IS32)

                      S-trap: 140-300 mm (IS17)

                      P-trap: 180 mm roughing-in

  • Seat: Care toilet seat. Quick release seat with stainless steel hinges, soft closing
  • Setout: Variable 75-280 mm.
  • Fixing: This is a close coupled toilet suite — the cistern is fixed directly to the pan and does not require wall fixing. Pan may be bedded with cement base or using silicone sealant.

Typical Installation

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.