Skip to main content

Specification Data Sheet

Cast Stainless Steel round vinyl floor drain, threaded BSP with three stainless steel lock down Allen key screws, machined/linished surface.  Heavy duty removable clamping collar with 3 lock down lugs and three stainless steel pan head screws with grey enamel coated cast iron vertical standard body, reversible membrane collar, weep holes and three stainless steel lock down screws, and stainless steel primary removable strainer basket.


  • Complies with AS/NZS 4994:1998 Discharge of commercial and industrial waste water to sewer
  • Cast Iron as per BS 1452/Grade 180 and AS 1830/T80
  • Complies with AS 3996 to Class C and EN 1253 Class M125 load rating
  • Ideal for commercial kitchens, carparks, shopping centres and educational facilities

Flow Rate Guide (litre/second)

  Pressure Head mm of Water
Grate Size 20mm 30mm 40mm
200 3.7 4.8 6.7


Typical Installation

Spare Parts

  • 303617 Stainless Steel Secondary Strainer Basket 150 Nom
  • 303644 Stainless Steel Strainer Basket 150 Nom

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.


Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.