Skip to main content

Features

Australian Made AS/NZS 3718 approved, Galvin Specialised GalvinLab® range of laboratory tapware for current NSW schools specification is supplied standard with fixed outlet, 80mm lever handle and button, 1/2" male BSP inlet and standard jumper valve, all finished in bright chrome plate. 

Features

  • Left hand activation
  • 80mm lever handle
  • ¼ Turn jumper valve 
  • Complies with NSW Education EFSG Guidelines 
  • Built in dual check valve 
  • Quality controlled - every tap is tested
  • Multiple outlet attachment options are available including vandal resistant aerator and fixed spray nozzle
  • Replaceable top assemblies are available for easy maintenance 
  • High quality chrome finish for easy cleaning and hygiene maintenance 
  • Australian Made; therefore, spare parts and support are available locally, reducing costs of down time on maintenance

Technical Information 

  • Inlet: 1/2" BSP - Male 
  • Outlet: Tube Nozzle 
  • Headwork: Jumper Valve 
  • Working Pressure Range (kPa): 50 Min - 500 Max 
  • Working Temperature Range  (°C): 5 Min - 80 Max 
  • Nominal Flow Rate (LPM): 6
  • Finish: Chrome 
Specification Data Sheet

GalvinLab® CP-BS Lab Set 1 Way Type 16 Fixed J/V Lever Handle Tube Nozzle - LH

Product Code: TL16.DFJL16CL

Australian Made AS/NZS 3718 approved, Galvin Specialised GalvinLab® range of laboratory tapware for current NSW schools specification is supplied standard with fixed outlet, 80mm lever handle and button, 1/2" male BSP inlet and standard jumper valve, all finished in bright chrome plate. 

Features

  • Left hand activation
  • 80mm lever handle
  • ¼ Turn jumper valve 
  • Complies with NSW Education EFSG Guidelines 
  • Built in dual check valve 
  • Quality controlled - every tap is tested
  • Multiple outlet attachment options are available including vandal resistant aerator and fixed spray nozzle
  • Replaceable top assemblies are available for easy maintenance 
  • High quality chrome finish for easy cleaning and hygiene maintenance 
  • Australian Made; therefore, spare parts and support are available locally, reducing costs of down time on maintenance

Technical Information 

  • Inlet: 1/2" BSP - Male 
  • Outlet: Tube Nozzle 
  • Headwork: Jumper Valve 
  • Working Pressure Range (kPa): 50 Min - 500 Max 
  • Working Temperature Range  (°C): 5 Min - 80 Max 
  • Nominal Flow Rate (LPM): 6
  • Finish: Chrome 

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and reduce the use of non-recyclable or non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS3500 and the PCA, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product

Please visit www.galvinengineering.com.au to view the full warranty, our Maintenance & Cleaning information and any other additional information.

Whilst all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remains the property of Galvin Engineering Pty Ltd.