The Slip-Safe® 69468XP combines a slip-resistant stainless steel grate with a lightweight ABS body, offering a cost-effective alternative to a full stainless steel cleanout where the lighter body weight and lower cost of ABS is preferred. It features an integrated vinyl flange and a slip-in connection compatible with PVC, HDPE, or copper risers.
As a cleanout, the 69468XP provides access to the drainage pipe beneath for maintenance and inspection while presenting a slip-resistant walking surface at floor level. The textured stainless steel grate reduces the risk of pedestrian slips and falls, making it well suited to car parks, shopping centres, concourse areas, and decks. The vinyl flange seals cleanly against sheet vinyl flooring. Stainless steel lock-down Allen key screws secure the grate.
Complies with AS 3996 Class B for 100mm openings and Class C for 150mm and above, and EN 1253 Class C. WaterMark certified to WMTS 040 (Lic. WMK02448). The spigot fits directly inside PVC, HDPE, or copper risers for fast and trouble-free installation.
Features
Technical Information
We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.
Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.
Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.
While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.
Click the buttons below to read Galvin Engineering's Terms and Conditions.
 |
 |
 |
